Home page

Storefront Commerce

Welcome, Guest | Sign In
Showing 51 - 100 of 4483 Results
 
Page: 1 2 3 4 5 6 7 8 9 10 > >> 
Results Per Page: 25 | 50 | 50
Hide Thumbnail
Part Number Mfg. Part Number Price Availability Quantity
Pneumatic Venturi Blowers are ideal for exhausting hazardous vapours from below ground locations. Used to ventilate explosive and hazardous vapours or fumes safely with no moving parts. The Venturi’s lightweight cast aluminum base and galvanized steel horn operates on compressed air or steam.	46.50” L<br />
	1” NPT<br />
	32.3 LBS<br />
	5041 CFM @ 90 PSIG<br />
	Static grounding lug is standard<br />
	Operating pressures up to 140 psi<br />
<br />
<br />
<br />
MASASI4100 SASI4100 CAD919.36 EA Out of Stock    Add to Cart
Pneumatic Venturi Blowers are ideal for exhausting hazardous vapours from below ground locations. Used to ventilate explosive and hazardous vapours or fumes safely with no moving parts. The Venturi’s lightweight cast aluminum base and galvanized steel horn operates on compressed air or steam.
  • 46.50” L
  • 1” NPT
  • 32.3 LBS
  • 5041 CFM @ 90 PSIG
  • Static grounding lug is standard
  • Operating pressures up to 140 psi
Contractor’s Ventilation Fan Kits – Standard Fan Kit	The Saddle Vent® Ventilation Systems is now available in a low cost contractor’s kit.<br />
	Fan<br />
	6’ and 15’ duct stores in Duct Canister <br />
	90 degree elbow joint<br />
	Saddle Vent® and universal mount.<br />
	Explosion-proof kit includes conductive Saddle Vent® and explosion proof-fan. <br />
<br />
<br />
<br />
MASCVF8A15KIT CVF8A15KIT CAD1,034.27 EA Out of Stock    Add to Cart
Contractor’s Ventilation Fan Kits – Standard Fan Kit
  • The Saddle Vent® Ventilation Systems is now available in a low cost contractor’s kit.
  • Fan
  • 6’ and 15’ duct stores in Duct Canister 
  • 90 degree elbow joint
  • Saddle Vent® and universal mount.
  • Explosion-proof kit includes conductive Saddle Vent® and explosion proof-fan. 
Contractor’s Ventilation Fans 	Rugged low-density polyethylene material is perfectly suited for the rigors of the contractor’s market.<br />
	Resists exterior impact without dents.<br />
	CSA/CUS approved for outdoor use.<br />
	Continuous moulded housing with built in handle.<br />
	Attachment points on the fan allow for connection of 6, 15 or 25ft polyethylene duct.<br />
	Finger guards supplied on both ends of fan.<br />
	1-year warranty.<br />
<br />
<br />
<br />
MASCVF8EXP CAD2,563.60 EA Out of Stock    Add to Cart
Contractor’s Ventilation Fans 
  • Rugged low-density polyethylene material is perfectly suited for the rigors of the contractor’s market.
  • Resists exterior impact without dents.
  • CSA/CUS approved for outdoor use.
  • Continuous moulded housing with built in handle.
  • Attachment points on the fan allow for connection of 6, 15 or 25ft polyethylene duct.
  • Finger guards supplied on both ends of fan.
  • 1-year warranty.
The Saddle Vent® allows unrestricted entry and exit and improves ambient light in a confined space opening. 	Developed by Air Systems and in use around the world for over 20 years to make it easier and safer for workers to enter and exit a confined space. <br />
	Takes up only 3 inches in a manhole opening and functions as a fresh air conduit to the workers in the confined space. <br />
	With the Saddle Vent® in place, continuous ventilation is supplied to the workers by eliminating the need to remove the air duct each time a worker needs to enter or exit a confined space, increasing safety and productivity.<br />
<br />
<br />
<br />
MASSV189 V189 CAD247.53 EA Out of Stock    Add to Cart
The Saddle Vent® allows unrestricted entry and exit and improves ambient light in a confined space opening. 
  • Developed by Air Systems and in use around the world for over 20 years to make it easier and safer for workers to enter and exit a confined space. 
  • Takes up only 3 inches in a manhole opening and functions as a fresh air conduit to the workers in the confined space. 
  • With the Saddle Vent® in place, continuous ventilation is supplied to the workers by eliminating the need to remove the air duct each time a worker needs to enter or exit a confined space, increasing safety and productivity.
One-hand operation adapter for Gastec GV-100S pump.	Maintains a vaccum of 50mL or 100mL<br />
	Makes sampling with one hand quick and easy <br />
	Requires no calibration or maintenance <br />
<br />
<br />
<br />
IGGV700S GV-700 CAD148.81 EA In Stock    Add to Cart
One-hand operation adapter for Gastec GV-100S pump.
  • Maintains a vaccum of 50mL or 100mL
  • Makes sampling with one hand quick and easy 
  • Requires no calibration or maintenance 
Gastec smoke tester kit, used to determine gas flow direction with smoke. 	Includes 1 box no. 6501 smoke tubes, aspirator bulb, rubber caps, metal tip breaker & carrying pouch<br />
	Good for approximately 50 tests <br />
	Replacement smoke tubes can be purchased using part number IG6501 <br />
	 Operation is quick and simple<br />
	 Kit comes with rubber aspirator bulb, six smoke tubes and rubber caps in a soft carrying case<br />
<br />
<br />
<br />
IG6500 500 CAD99.77 KT In Stock    Add to Cart
Gastec smoke tester kit, used to determine gas flow direction with smoke. 
  • Includes 1 box no. 6501 smoke tubes, aspirator bulb, rubber caps, metal tip breaker & carrying pouch
  • Good for approximately 50 tests 
  • Replacement smoke tubes can be purchased using part number IG6501 
  •  Operation is quick and simple
  •  Kit comes with rubber aspirator bulb, six smoke tubes and rubber caps in a soft carrying case
Gastec hot probe for high temperature sampling. 	Cools hot gases for measurement (60 to 600ºC)<br />
	Comes with 40mm black tube<br />
	Use with IG345 hot probe holder<br />
<br />
<br />
<br />
IG340 340 CAD115.47 EA In Stock    Add to Cart
Gastec hot probe for high temperature sampling. 
  • Cools hot gases for measurement (60 to 600ºC)
  • Comes with 40mm black tube
  • Use with IG345 hot probe holder
Gastec hot probe tube holder for high temperature sampling. 	Assists in stability when using hot sampling probe<br />
	For use with IG340<br />
	Cannot be used with twin-tubes or oxygen tube IG31B<br />
<br />
<br />
<br />
IG345A 345A CAD187.05 EA In Stock    Add to Cart
Gastec hot probe tube holder for high temperature sampling. 
  • Assists in stability when using hot sampling probe
  • For use with IG340
  • Cannot be used with twin-tubes or oxygen tube IG31B
Gastec extension hose for use with GV-100 sampling pump.	Attaches to inlet of sampling pump <br />
	For remote downward measurement in confined spaces <br />
	5 meters long <br />
<br />
<br />
<br />
IG351A 351A-5 CAD192.43 EA In Stock    Add to Cart
Gastec extension hose for use with GV-100 sampling pump.
  • Attaches to inlet of sampling pump 
  • For remote downward measurement in confined spaces 
  • 5 meters long 
Gastec Pyrotec Pyrolyzer for detection of sulphuryl fluoride (vikane) gases.	Converts sulphuryl fluorides into detectable/measurable gas using thermal cracking <br />
	Uses 4 AA batteries (not included); 2 hour continuous operation time<br />
	For use with Gastec Pyrotec detector tubes<br />
<br />
<br />
<br />
IG860 860 CAD733.03 EA In Stock    Add to Cart
Gastec Pyrotec Pyrolyzer for detection of sulphuryl fluoride (vikane) gases.
  • Converts sulphuryl fluorides into detectable/measurable gas using thermal cracking 
  • Uses 4 AA batteries (not included); 2 hour continuous operation time
  • For use with Gastec Pyrotec detector tubes
Showing 101 - 200 of 4483 Results
 
Page: 1 2 3 4 5 6 7 8 9 10 > >> 
#

Line Item Add

Item Number:
Quantity:
Unit of Measure: